mo.unit - Navigation in Setup

The mo.unit blue and mo.unit basic can be configured using the horn button.

To do this, activate the ignition while the horn button is pressed. In the setup menu, the horn button can be used to switch through the menus. All menu items are described in the respective operating instructions.
To call up a submenu, press the horn button for 2 seconds. One of the OUT (output) LEDs should now flash.
By a simple keystroke, the selection option can be selected in the respective submenu.
To return from the submenu to the higher level, press the horn button again for 2 seconds, one of the IN LEDs should now flash.

To exit the setup menu, press the horn button for approx. 5 seconds. The mo.unit will calibrate all outputs and then switch to normal mode.

If a mo.unit blue is used, the calibration of the mo.unit blue can be done via the mo.ride app.