mo.unit blue - Keyless-Go

Proceed as follows for Keyless-Go:

For setup, the mo.unit blue must be completely wired.

• Install the latest version of the mo.ride app
• Give the app permission to use Bluetooth
• Register or login to the mo.ride app

If there are problems here, see article "mo.ride app – registration not possible".

• Set up a parking space in the garage or select an existing motorcycle
• Connecting hardware in the mo.ride app

If you have issues with paring, please read the article "mo.unit blue – cannot be paired".

• Update mo.unit blue firmware to the latest version
• Calibrate range (click power icon in the app top right corner)
• Click on Change Range to calibrate the desired distance

Now the motorcycle can be unlocked with the smartphone. If the motorcycle is in the calibrated distance, it unlocks. This is indicated by a short flash of the turn signals. The app must be open in the background of the smartphone.

• Double-click on the start button to activate the ignition
• Press the start button briefly to start the engine
• Double click deactivates the ignition and the engine stops
• Double click again to deactivate the on-board voltage

Now remove far enough from the motorcycle to secure it. This is again indicated by the turn signals.

The mo.unit blue can only be switched off with a double click. Removing it from the motorcycle is not enough.

If you have any difficulties, please contact the motogadget support team.