mo.unit - Flasher function
The mo.unit has an internal flasher unit, an additional flasher unit is not required. There is also an option to activate a “soft blink”, similar to the mo.wave.
An automatic path- or time-controlled flasher switch-off can be activated.
You can also configure a timer controlled shutdown where the turn signal switches off after 10s, 20s or 30s.
mo.unit basic:
Here, only a timer controlled shutdown can be configured. The LEDs on the mo.unit basic can be used to check which menu and which setting is selected. The input LEDs show the menu and the output LEDs show the configuration.
In the manual under point 9 you can find all modes that can be set via the setup.
Activate timer controlled shutdown for mo.unit basic:
- Press the horn and switch on the ignition (alternatively, switch on the ignition and press the horn 3 times in quick succession)
- Press horn twice to reach menu item 3
- Press horn for 2 seconds
Here, you can configure the switch-off after seconds. The following options are available (Off, 10s, 20s and 30s)
- Exit setup menu (press horn for 2 seconds, then press horn for 5 seconds)
mo.unit blue:
If a speedometer sensor is connected to the mo.unit blue a route controlled shutdown can be configured. The turn signal will be switched off automatically after 50m distance. The speed sensor must be taught-in in the mo.unit blue before this function can be used. The functions can be configured via the horn as with the mo.unit basic or via the mo.ride app.
- Install mo.ride app on your smartphone
- pair the mo.unit blue with the mo.ride app
- Select vehicle
- Call up settings (gear wheel in the upper right corner)
- Select mo.unit Settings
- Select indicators
All configurations are then available here with their respective descriptions.
Integrate hazard lights with a tactile button:
It is possible to integrate hazard lights with a tactile button and two diodes.
