mo.unit - Indicators light up weakly when the ignition is on

The mo.unit has a position light function that can be configured under menu item 6. When this is activated, the indicators receive a low current when the ignition is switched on and therefore light very weakly.

When using a mo.unit blue, the following steps are needed to configure the position light via the mo.ride app.

Install mo.ride app on smartphone
pair the mo.unit blue with the mo.ride app
Select vehicle
In the mo.ride app select the mo.unit settings (top right on the gear wheel)
Select mo.unit Settings
Select position light

Here, the brightness can be adjusted in steps between 0% and 50%. The setting is only accepted after confirming with OK.

With mo.unit basic this must be configured with the horn button.

Keep the horn pressed and switch on the ignition (alternative: switch on the ignition and press the horn 3 times in quick succession)
Press the horn 5 times to change to menu item 6
Hold horn for 2 seconds to enter the submenu
Now select the intensity.
Press the horn for 2 seconds to leave the submenu
Press the horn again for 5 seconds to exit the Setup Menu

The LED of the mo.unit shows you which menu item you are in and which setting is selected here.