motoscope pro - does not work

Check the wiring of the motoscope pro.
- red cable with fuse to battery +12V
- brown cable to switched +12V
- black cable to vehicle ground

Check if the motoscope pro is connected to the on-board voltage by measuring the voltage with a multimeter.
With the ignition switched on, measure red cable to ground and then brown cable to ground. If no voltage is present, check all fuses and the wiring on the motorcycle.

If the error still cannot be found, please contact the motogadget support team.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.