motoscope - Navigation in Setup

To make adjustments on the motoscope you have to enter the setup menu first.

Depending on the motoscope a different display has to be selected.

• motoscope pro: in the lower display SPEED
• motoscope tiny, vintage, speedster: hour
• motoscope mini: Speed
• motoscope classic: Speed

To enter the setup menu, press and hold the menu button for approx. 3 – 4 seconds until “Setup” appears.

The units are operated using the menu button. To get to the different levels of display and setup, the duration of pressing the button is varied.

There are always 3 different times the button is pressed, this is shown in the motoscope on the display or by the LEDs.

Level 1: < 1s                           
Function: Select the next option or increment a digit

Level 2: 2s – 3s                                   
Function: Selection of the next/subordinate level or the next digit. Delete memory values.

Level 3: > 3s                                   
Function: Selection of the previous/ superior level or leaving the menu item.

In the operating manual of the respective motoscope you will find a flowchart which can be used for orientation.